2023 Liquid Metal 27 Salish Cabin Cruiser

Features of the Salish 27'3 Maquinna Series

• Length measured bow to transom 27' 3"
  
• Overall length (with outboard bracket) approx. 29' 8"
  
• Overall beam, 9' 5-3/4" (not including Tessilmare rubber trim)
  
• Reverse chine hull
  
• Bottom plate 1/4" 5086 marine grade aluminum
  
• Side plate 3/16" 5086 marine grade aluminum
  
• Side sheet stiffeners, 2 per side
  
• Lifting strakes, 2 per side
  
• Variable degree dead rise (20° at transom)
  
• Outboard bracket/hull extension with full width swim grid with easy access Armstrong hatch
  
• Longitudinal and transverse interior framing
  
• Insulation of hull with foam floatation
  
• 3/16" welded aluminum floors with cockpit drains to shed rainwater
  
• All floors and side decks to have a non-skid finish (includes outboard bracket top)
  
• Bow and Stern eyes
  
• Mount for transducer and anode (bolt-on anode included)
  
• Drain with SS thread in plug
  
• Mounts for trim tabs (trim tabs not included as a standard)

Cabin

• Cabin to be forward leaning 2 piece windshield
  
• Interior headroom 6' 9" on centerline
  
• Insulated cabin top with fabric headliner finish
  
• All windows to be aluminum framed with clear glass
  
• Two windows per side, forward windows include sliders, no screens
  
• Two fixed windows on aft cabin wall with door hinged to port
  
• Interior and exterior grab rails
  

Standard interior package includes:

• - Grey/black head liner on cabin ceiling
  
• - Painted interior surfaces in textured Greystone Zolatone
  
• - Walls are not insulated
  
• - Black/grey fabric upholstery
  
• - Cabin top platform for mounting of electronics, lighting, etc.

Fuel System

Fuel cell capacity - approx. 580 Litres

• Single removable .187" fuel cell built under bolt down centerline decks
• Fuel tank is made to meet construction standards as set out in Transport Canada TP1332E
• Fuel system meets EPA regulations for fuel emissions using a pressure relief system
• Tank includes all fittings, plumbing, wiring and shut-off valve(s)
  
• A smaller access hatch above the tank is installed for ease of maintenance
• Fuel system includes forced air ventilation for below deck tank
• Tank(s) are complete with baffles and are pressure tested to 3.5 PSI

Vessel Components

• Small bow rails
  
• 7 weld on aluminum cleats
  
• Tessilmare 2-1/2" Bino Profile D-rubber along gunwale edge (black in color)
  
• Laz box with aluminum hatches along transom for storage of batteries and fuel filter
  
• Two Tempress Elite Hi-back helm seat on shockwave S5 pedestal (Helm includes fore/aft slide)
  
• Two bench seats lengthwise in cabin running aft of helm seats port/stb. Each bench has storage below
  
• Total seating for 8-10 passengers
  
• Side storage trays on aft deck

Electrical Package

• Triple 27 series batteries with boxes, switch and auto charge relay
  
• RIGID Bow LED lighting inset in hull
  
• LED Navigation lights (port, starboard and all around)
  
• Bilge pump - Rule 900GPH with 2000GPH back-up pump, with float switch and high water alarm
  
• Single 12V Plug-in on dash with USB port
  
• BlueSeas 8 position switch and fuse panels
  
• Ongaro stainless compact horn
  
• Windshield wipers, one for each forward window with washdown system

Cuddy Cabin

• V-Berth, including upholstery and headliner
  
• Side trays in cuddy
  
• Lewmar access hatch on cuddy top
  
• Sprayfoam insulation
  
• Custom upholstery package

Custom Interior / Paint Package

• Vinyl wrapped ceiling and wall panels in matte black
  
• Painted interior/exterior surfaces finished in matte black
  
• Black headliner, hull liner and upholstery for V-berth
  
• Decking is aluminum with non-skid coating

Optional Manufacturer and Dealer Upgrades: TBA

• Engine Guard upgrade (2" aluminum pipe engine guard)